QNW4000INSTRUCTION MANUALThe exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and
- 9 -This camera is provided with Day/Night function that can detect the brightness of the objects andautomatically switch the color mode / black-and-
- 10 -OPTIONwiring in front of the lens blocking the image.The heater glass unit has a weatherproof seal. Before mounting the heaterglass unit, make s
- 11 -(2)Shade (Cover for outdoor use)Mounting method for the shade (SS-20)Fixing boltThrough holefor boltShadeTripod fixingtapped holeCameramain unit
- 12 -Mount the camera on the ceiling mountingbracket using the tapped holes in the top of thecamera and the two fixing bolts attached to thecamera.Ca
- 13 -TROUBLESHOOTINGSymptomImage is not seen.Image is not colored.Image is not coloredaccurately.Check pointIs the iris of the lens adjusted appropri
- 14 -SPECIFICATIONSModelPower sourcePower consumptionPick-up deviceEffective picture elementScanning areaScanning systemScanning frequencySync. syste
- 15 -6X1NRNA02 Printed in JapanELMO (Europe) G.m.b.H.Neanderstr. 1840233 Dusseldorf,GermanyTel. 0211-376051-53Fax. 0211-376630E-mail:elmoeurope@AOL.
- 1 -1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6.
- 2 -Caution:- Do not install this camera at sea, at coast or in coastal area or at any corrosivegas generating place.- Since it is not of totally wea
- 3 -PART NAMES AND FUNCTIONSFront glassTripod fixing tapped holes (1/4-20UNC)These tapped holes are used to fix the camera on the tripod and mount th
- 4 -INT/LL switchINT (internal) control switchWhen the internal synchronization is used, set the switch to the INT side.LL (Line-Lock) control switch
- 5 -SENS-UP switchTo increase the sensitivity, set this switch to ON position.DAY/NIGHT switchWhen the DAY/NIGHT function is used, this switch is tur
- 6 -Coaxial core clampThis clamp fixes the cores of the coaxial cable.Coaxial cable clampThis clamp fixes the sheath of the coaxial cable.Ground term
- 7 -1. Remove the rear cover, the GND cable, and the two 2P connectors.2. Connect the coaxial cable and the power cable.After connecting the power ca
- 8 -1. Built-in LensThis camera is built in with a dedicated varifocal lens.F: 1.4 f: 2.8mm~5.8mm2. Lens adjustmentAdjust the field angle of the lens
Comments to this Manuals