Please read this instruction manual carefully before using this PTC-201C IP and keep it for future reference.PAN • TILT • ZOOM COLOR CAMERAPTC-201C IP
- 9 -3. SETTING UPNote: When carrying the Camera, be sure to hold the base.Note: Do not turn the Camera head in the PAN-TILT direction by hand, orthe
- 10 -•Make 4 holes of 8mm (5/16 in.) to theCeiling Tile as shown.(2) Making mounting holes to the Ceiling Tile
- 11 -• Put the Ceiling Tile between the Main Unitand the Ceiling Plate, and fix the Main Unit byfastening 4 wing Nuts.(3) Fixing the Main Unit
- 12 -• Loop up one end of the Safety Wires throughthe respective safety wire looping holes madeon the Ceiling Plate, and then loop up the otherend of
- 13 -Connection examples for the Camera
- 14 -[1] Power supply to the CameraThe Camera has no POWER switch. Power is supplied to the Camera when the AC adapter is connected to the wall socke
- 15 -[3] Operating PAN/TILT• While watching the screen, press any of (UP, DOWN, LEFT, RIGHT)direction buttons for the direction in whichyou want to w
- 16 -[4] Lens operation(1) Zoom operation• The object is zoomed in (appears larger in thescreen) when TELE button of ZOOM ispressed, or zoomed out
- 17 -[5] BLC (Back Light Control)In case the back lighting is too bright to shoot themain object clearly, press BACK LIGHTbutton.To cancel this mode
- 18 -5. THE ID NUMBER SETTINGWhen more than one Cameras are laid out adjacently and operated via the wireless remotecontroller, the Cameras received
1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus outdoors.6. Do not
- 19 -6. OSD (On-Screen Display)OSD Display menu11311141210<<MAIN MENU>>(1) MAIN CONTROL(2) CAMERA SETUP SELECT ENTER (Return to M
- 20 -(2) CAMERA SETUP SELECT ADJUST (Return to MENU )<1> BLC<2> AGC<3> AP GAIN<4> FL<5> NEXT PAGE<6> MEMO
- 21 -(3) TITLE SETSELECT ADJUST(Return to MENU )<1> MOTOR SPEED<2> SPEED<3> L/R DIRECTION• To set the title for each preset positi
- 22 -7. ALARM IN/OUT TERMINALSBy short-circuiting the ALARM 1 IN or ALARM 2 IN Terminal Block to the GNDterminal on the Terminal Block, the Camera mo
- 23 -DIP Switch (4)8. INITIALIZATION OF THE CAMERA SETTINGSThe camera settings can be initialized with the DIP switch (4) located on the back panel.•
- 24 -This system can be controlled from the controller by connecting the RS-485 terminal on theTerminal Block to the controller via an RS-485 convert
- 25 -10. TERMINATING RESISTANCE AND ID ADDRESS SETTINGS[1] Setting the terminating resistanceThe terminating resistance is built in each Camera, and
- 26 -Setting the ID address
- 27 -
- 28 -11. NETWORK FUNCTIONSBy connecting this Camera to the network using Ethernet (10BASE-T/100BASE-TX), thefollowing functions are made available fr
- 2 -CAUTION• Do not use any power supply otherthan specified.WARNINGTO REDUCE THE RISK OF FIRE ORELECTRIC SHOCK, DO NOTEXPOSE THIS APPLIANCE TO RAINO
- 29 -Connection to the network• Connection using HUB Connect the Ethernet terminal (RJ-45) of the Camera to the HUB port with anEthernet straight cab
- 30 -• When [Network Configuration] is displayed, change the set values according to theenvironment of the network to be used. To reset the changed s
- 31 -Initialization of the network settingsIf the connection from the network is disabled due to destruction of the network settings ordisremembering
- 32 -Display of static imagesBy clicking the links [VGA] and [QVGA] of CAPTURE at the PTC-201C IP page, and theLIVE page, the static images of 320X24
- 33 -Operation of remote controlWhen on the LIVE page the mark CONTROL is displayed above the [HOME] button,remote control is enabled. For display/
- 34 -(1) Zoom operationClicking the buttons effects zoom operation. Clicking the TELE (T-) buttons and theWIDE (-W) buttons provides zoom-in and zoo
- 35 -About controlRemote control of the Camera can be accomplished by only one client. Control is given tothe client who satisfies the following cond
- 36 -Quad displayBy clicking the link [QUAD] next to *LIVE on the “PTC-201C IP” page or the link[QUAD] next to MONITOR SIZE on the LIVE page, the Qua
- 37 -(2) Operation• The cameras specified on the [Setting for quad display] page are displayed. (Theupper-left screen segment always displays moving
- 38 -[3] Alarm function - Saving image files to the remote host byinput of the alarm signalBy shorting the alarm signal input terminal <1> or &
Be sure to use the provided AC adapter.Do not leave the Camera under direct sunlight or by heater, or theCamera may be discolored, or damaged.Do not p
- 39 -• After the selection, click the submitbutton [SUBMIT]. If [No action] isselected, when the message “Thesaving of the setup was completed.”is di
- 40 -[4] IP address filtering functions - Restricting clients who haveaccess to the CameraThis function is intended to restrict clients who have acce
- 41 -about to change the IP address for the administrator.” or other message is displayed.Confirm the changed IP address for the administrator. If it
- 42 -[5] LIVE connection list - Listing the clients connected to theLIVE pageThis function is intended to display in list form the IP addresses of th
- 43 -Item OutlineIP AddressThe IP address of the Camera. Specifies the value allocated by the administrator of the network in use.Factory set to 192.
- 44 -Item OutlineIP address of image receiving serverSpecifies the IP address of the destination host to save.Factory set to 0.0.0.0.Password of imag
- 45 -Item OutlineDisplaySpecifies whether to enable or disable the display of moving images on the Quad Display page.Factory set to Disabled. However
- 46 -12. TROUBLESHOOTING HINTSSymptomNo images on TVmonitorOut of focusNo operation viathe wireless remotecontrolThe preset positionis blurryPossible
- 47 -If the problem still remains after checking the above, consult your nearest dealer or anauthorized ELMO service center. SymptomConnection to the
- 48 -13. SPECIFICATIONSGeneralCameraItem SpecificationsPower source 12V DCCurrent consumption 1.5AOutside dimensions 124mm(W) X 153mm(D) X 160mm(H) (
- 4 -CONTENTSIMPORTANT SAFETY INSTRUCTIONS ...1HANDLING PRECAUTIONS ...
- 49 -Pan/TiltOtherItem SpecificationsPan range Left 150° Right 150°Tilt range Up 30° Down 90°Pan Tilt Speed Auto/Manual (8 speed)Item SpecificationsT
- 50 -14. SUPPLIED ACCESSORIESItem QuantityAC adapter Model NO: SA-121A6F-11 (5Z0541) 1(rated input AC100-250V 47-63Hz)Power Cord 1Infrared wireles
WARNING:Unauthorized recording of copyrighted, materials, photographs, etc.may infringe on the rights of copyright owners and be contrary tocopyright
Overall View- 5 -1. PART NAMES AND FUNCTIONSBACK PANELCAMERA HEADINFRARED SENSORLEDBASELENSThis camera is designed to mount on ceiling panels only.ETH
Wireless Remote Controller- 6 -POWER1OPEN2CLOSE3AUTO4NEAR5FAR6AUTO7TELE8WIDE9MENU12CURSOR/PAN-TILT13Directions10HOME11ID17RESET15BACK LIGHT14PRESET16N
Point the infrared emitting window of the wireless remote controller at the infrared sensorof the Camera, located at the front, and the rear panel, an
- 8 -PreparationRemove the battery case cover by pressing downward on the [ ] mark part in the direction as indicated by the arrow.Install 2 pcs. of b
Comments to this Manuals