13
Connection to the monitor and the projector
Note: Be sure to turn OFF the power supply to all equipment before making any connections to protect the Presenter
and all the connected equipment.
Note: Hold the cable plug part when connecting or disconnecting the cables.
Connection to the composite video-in terminal
Use the supplied RCA video/audio cable.
Connection to the S-video-in terminal
Connect the S-video-out terminal (mini DIN 4P) of the Presenter to the S-video-in terminal of the monitor.
For the S-video mode, use the supplied 4P mini DIN cable or an S-video connection cable available on the market.
If the equipment to be used is provided with a Y/C separate connector, a conversion adapter is necessary.
Connection to the RGB-in terminal
Connect the RGB output terminal of the Presenter to the RGB input terminal of the equipment with the supplied
RGB cable or a RGB connection cable available on the market.
If the display image shifts from the center, manually adjust the horizontal/vertical positions through the connected
equipment.
If vertical stripes appear on the screen with the use of video projector, it may be improved by manually adjusting the
dot-clock frequency of the projector.
Note: The resolution of the Presenter can be selected according to the resolution of the equipment to be
connected.
Reference Page • Resolution selection P.21
Comments to this Manuals