Elmo HV-3000XG Instruction Manual download pdf (Page 11)

2. WIRELESS REMOTE CONTROL

Point the infrared emitting part of the wireless remote control unit at the infrared sensor of the Visual Presenter, located

on the top of the column, and press the button for the desired function.

The receivable range may be narrowed when the Presenter is placed under sunlight, near an inverter fluorescent lamp

or in any other unfavorable surroundings. Depending on the conditions of fluorescent lamps, etc. the sensor may fail to

receive the infrared light. In such a case, relocate the Presenter, or take other countermeasures.

Receivable range

Distance : Approx. 7 m (23 ft.) or less from the light receiving area to the front of the wireless remote control

Angle : Approx. 30 degrees or less from the light receiving area to the front of the wireless remote control

rightward, leftward, upward and downward, respectively

Preparation

Remove the battery case cover by pressing downward on the [ ] mark part in the direction as indicated by the arrow.

Install 2 pcs of batteries (type R03, AAA) into the case in the direction as indicated there.

Note: Install the batteries with the right polarity.

Note: Change the batteries once a year.

Note: The batteries supplied with the Presenter are only for use in initially confirming the operation of the Presenter.

It is not guaranteed that these batteries can work effectively for the indicated period.

3. MOUSE

Select [0] by using the [D] key of the In/Out selector switch, and connect the mouse to the RS-232C terminal on the

rear panel. Then, "OSD" and "video pointer" can be displayed and operated.

Reference • Video pointer P.18

• Display of the OSD menu and

the operation of the mouse P. 21

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

No comments

Elmo HV-3000XG Instruction Manual Page 11