Elmo Computer Hardware 1.1 User Manual download pdf (Page 15)

Chapter 3: Installation

3.1 Site Requirements

You can guarantee the safe operation of the Guitar by ensuring that it is installed in an

appropriate environment.

Feature Value

Ambient operating temperature 0 °C to 40 °C (32 °F to 104 °F)

Maximum relative humidity 90% non-condensing

Operating area atmosphere No flammable gases or vapors permitted in area

Models for extended environmental conditions are available.

The Guitar dissipates its heat by convection. The maximum operating ambient

temperature of 0 °C to 40 °C (32 °F to 104 °F) must not be exceeded.

3.2 Unpacking the Drive Components

Before you begin working with the Guitar, verify that you have all of its components, as

follows:

 The Guitar servo drive

 The Composer software and software manual

The Guitar is shipped in a cardboard box with styrofoam protection.

To unpack the Guitar:

1. Carefully remove the servo drive from the box and the Styrofoam.

2. Check the drive to ensure that there is no visible damage to the instrument. If any damage

has occurred, report it immediately to the carrier that delivered your drive.

3. To ensure that the Guitar you have unpacked is the appropriate type for your

requirements, locate the part number sticker on the side of the Guitar. It looks like this:

Guitar Installation Guide

MAN-GUIIG (Ver. 1.1)

3-1

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

No comments

Elmo Computer Hardware 1.1 User Manual Page 15