Elmo QBiC S X1 Instruction Manual download pdf (Page 18)

MASS STORAGE MODE

This product can be used as a storage device. Using this mode, you can retrieve the

data stored in the micro SD card.

TURNING ON THE MASS STORAGE MODE

1. Open the micro USB Port Cover of the product.

2. Power off the product. Connect the micro USB plug (smaller one) of the

supplied USB cable to the micro USB port of the product. USB plug of the USB

cable to a USB port on your PC.

3. Press and hold [Power Switch] (over 5 seconds).

4. The micro SD card inside the product will be recognized as a removal disk.

Three beep sounds occur and the menu appears on the screen of your PC.

5. Select the menu and operate.

6. Power off the product. Remove the USB cable from the product and attach the

micro USB Port Cover.

CAUTION

Make sure you attach the cover properly and completely. Insufficient

attachment may deteriorate the waterproof performance and damage

the product.

Connect first and

then power on.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

No comments

Elmo QBiC S X1 Instruction Manual Page 18