Elmo QBiC S X1 Instruction Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
28
- Near industrial, scientific, and medical devices, such as a pacemaker
- Near in-plant radio station for mobile equipment identifier (license
required and being used in factory line; etc.)
- Near low power wireless base station (license not required)
Electromagnetic interference caused by using Bluetooth devices and this
product at the same area
Bluetooth devices and this product use the same band of frequency (2.4GHz).
So using these devices in the same area may cause electromagnetic
interference and it may cause lower communication speed or connection
failure.
Turn off the device which is not currently using if the communication problem
occurs.
Waterproof
This product is guaranteed to be waterproof under the criteria set forth by us.
However, we do not guaranty its waterproof performance in all conditions.
The product warranty does not cover malfunction due to misuse by the user.
We do not guarantee its waterproof ability if the product is given excessive
shock by dropping or bumping it. Contact your dealer or ELMO Customer
Service for repair (fee applies).
Inside of this product, card and battery, and the supplied AC adapter are not
waterproof. Do not touch them with wet hands.
The transparent dome in front of this product is for lens protection. Pay attention
to the handling as this dome is prone to scratches. Clear images may not be able
to be obtained if it has been damaged (depending on size and location).
Contact your dealer or ELMO for service to replace transparent dome (fee
applies).
Do not leave this product in any of the following places:
Outdoor, humid or dusty place
In a place exposed to direct sunlight (inside a car or by the window) or high
temperature
In a place where the temperature is below 0°Celsius (or 32°Fahrenheit,
freezing place without heating equipment)
In a place exposed to extreme temperature or humidity variation (such as near
air-conditioner or heater)
In a place exposed to frequent vibration (such as inside vehicle or machines)
Near magnet or magnetic field
Where organic solvents are used
Using this product in cold place
Touching metallic parts at the low temperature environment may infect skin.
Use gloves when using this product in the low temperature environment.
Condensation
“Condensation” is the formation of small drops of water on the inside or
outside of this product, especially on the inside surface of the lens, when
moisture in the air changes to liquid when it is brought from a cold place
suddenly into a warm place.
Using this product with condensation may result in malfunction.
If condensation occurs, turn power OFF, swipe the surface with a dry soft cloth,
and then leave this product in the place where humidity and dust are less and
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments